![background image](http://html1.mh-extra.com/html/phoenix/phx-200/phx-200_user-manual_1551268044.webp)
PG.44
50008-BS1
BOWL SEAL
50008-E01
ELEMENT KIT
50008-AD1
AUTODRAIN KIT
50008-STM
STEM ASSEMBLY
50008-BL1
BOWL LATCH
50008-BK1
BOWL KIT
B
B
E
B
INCLUDED WITH 50008-BK1 BOWL KIT
E
INCLUDED WITH 50008-E01 ELEMENT KIT
50008-DF1
DEFLECTOR
50008-SGK
SIGHT GAUGE KIT
B
30060-001
FILTER/REGULATOR SERVICE INSTRUCTIONS
BONNET
UPPER
PISTON SEAL
10031-001
LOWER
PISTON SEAL
POPPET
ASSEMBLY
30061-001
PISTON
30062-001
SLEEVE
POPPET
SPRING
MAIN BODY
Bowl rotated 90 degrees
for illustration purposes
C
CLEAN WITH A LINT FREE CLOTH
C
LIGHTLY GREASE WITH PROVIDED LUBRICANT
INSPECT FOR NICKS, SCRATCHES, AND SURFACE
IMPERFECTIONS. IF PRESENT, REDUCED SERVICE
LIFE IS PROBABLE AND FUTURE REPLACEMENT
SHOULD BE PLANNED.
C
C
C
C
APPLY LOW STRENGTH
PLASTIC THREADLOCKER
TO NUT
Snap Fit Tab Detent must snap into
groove for proper assembly.
To remove bowl depress tab, turn
& pull bowl down
TORQUE TO 3-5 INCH POUNDS
REFER TO ILLUSTRATION FOR
DISASSEMBLING, SERVICING
AND RE-ASSEMBLY.
MOUNTING SCREWS (4)
TORQUE TO 13-18 INCH POUNDS
50008-BFL
BAFFLE
INSPECT FILTER ELEMENT AND CLEAN BOWL REGULARLY.
A DIRTY FILTER CAN COLLAPSE AND ALLOW
CONTAMINATION OF SYSTEM CONTROLS.
KEEP SPARE ELEMENT ON HAND.
O-RING
O-RING
To remove bowl depress tab,
turn & pull bowl down
BE POSITIVE THAT ALL AIR
PRESSURE IS RELIEVED FROM
SYSTEM AND ALL SAFETY LOCKOUT
REQUIREMENTS HAVE BEEN MET
B
FLANGE
BE SURE THAT ALIGNMENT
NOTCH AROUND SCREW HOLE
IS PROPERLY ALIGNED