OCTANE ZR C O M P O N E N T I N S TA L L AT I O N
Selecting the placement of your new Octane-ZR Component speakers may be as easy as
using the existing factory locations or may require you to create a new location. Speaker
placement in the door, dash, or rear deck is the most common. See your local Phoenix Gold
Dealer for additional location options and mounting assistance.
OCTANE ZR W O O F E R I N S TA L L AT I O N
1. Many vehicles already have factory locations (Figure 1.) to house the "DROP IN" feature
of the Octane ZR Component line. If no existing locations are available or are not used
(Figure 2.), check the desired location for adequate cutout area and any depth obstruc-
tions. Make sure to allow sufficient clearance for window tracks, structural braces, trunk
lid springs, etc.
2. Assuming enough area and depth is available, use the provided template and trace the
speaker cutout and mounting holes onto the surface of the mounting location.
3. If the mounting surface is not structurally strong enough to accommodate screws,
(i.e.
plastic, cardboard) use the provided speed clips which will act as a nut for the supplied
screws.
4. Always provide water protection if not supplied in the vehicle. We suggest using a rain
shield or equivalent. If in doubt, please contact your Phoenix Gold Dealer.
30
30A
30
30A
BRIDGED
R+
L+
L-
R-
SPEAKER
+
-
RMD
B–
B
+
FRONT
REAR
6
3
T Y P I CA L S YS T E M H O O K U P
