MP-MX-3
- 3 -
™
1
2
3
4
5
1.- SD-caRD reader / USB-DRIVe reader / BT receiver
On the front there is a USB interface for connection to USB-DRIVE, a slot for the SD memory card, display,
PREV-NEXT, START-STOP, PAUSE and REPEAT buttons. With the IR remote control, all functions can be con-
trolled remotely, and you can also switch between SD-CARD, BT receiver and USB-DRIVE.
USB-DRIVE and SD-CARD are automatically recognized by the device. With a separate switch, it is possible
to turn off and on the MP3 player when not in use or in case of interference.
2.- eQUalIZaTIOn / VOlUMe / MaSTeR
VOl. - These controls are used to set the volume or sensitivity of the signals present at the inputs.
Bass controls „lOW“ are used to raise or lower low frequencies (+/- 12 dB). Treble controls „hIGh“ are used
to raise or lower high frequencies (+/- 12 dB). With the master control „MaSTeR“ and the treble and bass
controls you can determine the overall volume and equalization.
3.- MIcROPhOne InPUTS
Balanced XLR inputs - for connecting a dynamic mic. or - if the PHANTOM-POWER is switched on - intended
for a condenser mic.
4.- lIne InPUT
Cinch sockets „L“ and „R“ - suitable for connection of a sound carrier device with AUX output signal such as CD,
DAT, TUNER. The input is unbalanced 10 kOhm/0 dB.
5.- leD leVel InDIcaTOR
LED level display -27dB to 0 dB - shows the level of the output signal.
FROnT
© copyright 2018, Phoenix Professional audio Gmbh, www.phoenix-pa.com
Phoenix logo is registered with the DE Patent and Trademark Office (TM)
All trademarks are the property of their respective owners
Instruction manual