LEXI TWIN SHOWER
INSTALLATION INSTRUCTIONS
450-500mm
recommended
Shower Wall Outlet
hole 25mm
diameter
7mm diameter hole
Apply te
fl
on tape
Screw threaded adaptor to wall outlet.
Tighten
fi
rmly with allen key
Push appropriate plastic plug
into drilled hole. Locate lower
mounting adaptor over hole and
fi
rmly screw in place.
SHOWER
HAND SHOWER
1
2
4
5
Insert washers and
fl
ow
restrictor as shown into Shower
Rose.
Screw Shower Rose to arm.
Insert washers and
fl
ow
restrictor as shown into Shower
Hose.
Screw Shower Hose to Hand
Shower
and Shower Rail
IN0206 rev C
3
6
Test and check
for leaks
x2
x2
Thin Rubber
Washer
Flow
Restrictor
Thick Rubber
Washer
Thin Rubber
Washer
Flow
Restrictor
Thick Rubber
Washer
Adjust Lower Body to correct
position and tighten
grub screw.
Position Shower Rail over Wall
Inlet Adaptor and lower Wall
Adaptor and gently push in
place.
Fasten Shower rail by tightening
top and bottom grub screws.
Diverter Operation
Gently rotate the Main Tube
anti-clockwise 90 degrees.
When Main Tube is aligned
with the Shower Arm,
carefully remove the
protective Plastic Tab.
x2
Inlet Body
Main Tube
Removable
Plastic Tab
Tighten 2 grub
screws located at
the rear of the
Main Tube
Shower Arm
