4.2 engine Start
1.) place throttle bar into neutral gear position by
pushing the button on the bar inside (Note: the button
will stay inside as long as the gear is in neutral position).
1.1 now you have to push the throttle bar forward (still
in neutral gear position = Button pushed inside)
2.) push the “power” button in the upper left corner to
start the ignition
3.) after 10 sec. an acoustic signal indicates that the
engine is ready
Push the “Start” button on the upper right corner
Engine Stop:
1.
push and hold the lower right button to stop the
engine
2.
push the “start” button on the upper right again
to turn off the ignition
NOTE: if the ignition is not turned off the
batteries will be worn down! You can control the
on/off status by checking the display on the
engine panel
You must never speed up the boat over 2300 RPM
Attention!
When shifting from
forward to reverse leave the throttle a
few seconds in neutral position so that
the gear shift doesn´t break!
When catching a rope or something
similar in the
propeller, immediately switching to
neutral and stop the engine. Dive
overboard and free the rope!
