background image

DAISY CHAINING

Every Quattro3 comes with the built-in ability to connect to other Quattro3s (up to 15 units). 
This feature enables you to provide coverage for larger spaces using a chain of Q3s.

MAKING THE CONNECTION:

Choose the unit you wish to act as the master unit. This unit will be the one interfacing for 
the entire chain (i.e. telephone interface). The master unit will be the only unit connected to 
an external device, while the other units will connect only to each other.

Using either the provided daisy chain cable or any other Ethernet cable, connect one of the 
cable ends to the master unit’s daisy chain DOWN connector (the RJ45 connector marked 
DOWN). Take the other end of the cable and connect it to the next Quattro3’s daisy chain UP 
connector (the RJ45 connector marked UP). Repeat the process in order to connect a third 
unit to unit number 2. This process can be repeated with up to 15 units regardless of their 
interface type. All units in the chain must be Quattro3s.

POWERING THE DAISY CHAIN:

Every unit in the chain must be powered. In order to do this, there are two available options:
•   Power each unit separately, using its own provided USB cable, DC power supply, or internal  
     battery (if applicable).
•   Power only the master unit using the “Daisy Chain Power Kit”. This setup will require you 
     to connect only the first unit to a power source and will allow the rest of the units to feed
     off the master unit via the Ethernet daisy chain cables.

NOTE:

 The “Daisy Chain Power Kit” utilizes a 48V power supply not included with the 

Quattro3 and must be purchased separately. While any Quattro3 can be daisy-chained 
(regardless of interface) the daisy chain power method requires all units in the chain to have 
some type of secondary interface card (Quattro3 301 will not work). The daisy chain power 
method will work with up to 8 consecutive units before requiring another power source.

Connector Panel

Satellite Unit 3

Satellite Unit 2

Master Unit (Unit 1)

Daisy Chain Cable

Connector Panel

Connect to next unit

Interface

Module

Interface

Module

Interface

Module

DOWN

DOWN

DOWN

UP

UP

UP

Summary of Contents for 301











Reviews: