Issue department
：
R&D Division
Date
：
2019-11-17
Product Function
instruction
Author
：
Jarek
No
：
CB3433A
CB.34.33.01
Version
：
1.0
Page 3 of 5
3
3.3.LUMBAR ACTUATOR
Connect to foot actuator,control by remote single:
Click
Lumber up
button
，
foot actuator moves out
，
stop when released
；
Click
Lumber down
button
，
foot actuator moves in
，
stop when released
；
This function takes effect only by pressing the corresponding button on the remote.
3.4.HEAD1 VIBRATION & HEAD2 VIBRATION
Connect to head massage,control by remote:
Click head m button,head massage strengthens by one level;
Click head massage - button,head massage weakenby one level;
This function takes effect only by pressing the corresponding button on the remote.
3.5.FOOT VIBRATION
Connect to Foot massage,control by remote:
Click FOOT m button,head massage strengthens by one level;
Click FOOT massage - button,head massage weakenby one level;
This function takes effect only by pressing the corresponding button on the remote.
3.6.Power LED & PAIRING LED
Power supply for control box, PAIRING LED of control box is blue, POWER LED is green
。
3.7.PAIR & RESET button Function
Pair Function
：
Power supply for control box,Pair LED lights to blue
，
the control box enters into mode of code paring
；
Press and hold the paring button of Remote, the backlight of paring LED flashes, the backlight of remote flashes,
the remote enters into mode of code paring;
The backlight of paring LED of remote stops flashing, and the paring led of control box turns off, it indicates that
the code paring is successful;
