15
14
Cleaning
®
The
IPROXX
handset was designed so that it would be easy to clean. Its smooth surfaces
simplify the cleaning process.
1 Be sure to disconnect the handset cable from the drive or control unit before you start
cleaning.
®
2 Clean the IPROXX handset using a moist cloth.
3 Be sure that you do not damage the connecting cables during the cleaning.
Never clean the handset in an automated washing system or with a high-pressure cleaner.
Do not allow fluids to penetrate the handset. Damage to the handset could result.
Do not use a cleanser that contains benzene, alcohol or similar solvents.
Disposal
®
The IPROXX handset consists of electronic components, cables and metal and plastic
parts. You should observe all corresponding national and regional environmental regulations
®
when disposing of the IPROXX handset.
The disposal of the product is regulated in Germany by Elektro-G, internationally by the EU
Directive 2012/19/EC (WEEE), or by any applicable national laws and regulations
®
The IPROXX handset may not be disposed of with normal household waste!
EU Declaration of Conformity
In compliance with Appendix IV of the EMC-Directive 2014/30/EU
In compliance with Appendix VI of the EU RoHS Directive 2011/65/EU (incl. Commission
delegated Directive (EU) 2015/863)
The manufacturer:
DewertOkin GmbH
Weststraße 1
32278 Kirchlengern
Deutschland - Germany
declares that the following product
®
IPROXX SM with DewertOkin drive system
®
IPROXX SM+ with DewertOkin drive system
®
IPROXX SMP with DewertOkin drive system
meets the requirements of the following EU directives:
Electromagnetic Compatibility Directive 2014/30/EU
COMMISSION DELEGATED DIRECTIVE (EU) 2015/863 of 31 March 2015 amending
Annex II to Directive 2011/65/EU of the European Parliament and of the Council as
regards the list of restricted substances.
Applied standards:
EN 55014-1:2006/A1:2009/A2:2011
EN 55014-2:1997/A1:2001/A2:2008
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 62233:2008
EN 1970/A1:2005, main section 5.12
This declaration of conformity is no longer valid if constructional changes are made which
significantly change the drive system (i.e., which influence the technical specifications found
in the instructions or the intended use)!
Kirchlengern, Germany 01 April 2020
Dr.-Ing. Josef G. Groß
Managing Director
04/2020
ID 56171 3.0
04/2020
ID 56171 3.0
®
IPROXX SM/SM+/SMP
