Ensure an O-ring seal is present on the clamping
face of the water box.
1
Select the water box to suit the pipe size to be
tested, check the foam seal is in good working
condition and that it is mounted securely to
the water box.
Select the appropriate probe and attach to the
water box, securing into place with the corner
screws.
Fit screws through the saddle, the probe and
into the water box securing all components
together.
1.2
1.1
Position the probe mounting saddle over the
centre of the probe.
Fit the central screw post of the water box
through the buggy and attach the large thumb
screw to the post on top of the buggy.
1.4
1.6
1.3
1.5
1. Water box assembly
2
