Tighten the two screws to fix the arms
in position
Screw on the encoder and set the
spring tension
Slide the arms in to fit the wedge
Tighten the clamping screw until the
wedge is held rigidly
Scan left or right with the encoder
mounted on the back
1.2
2.1
1.1
4
2.2
There are three encoder mounting
positions; Two rear mounting and one
side mounting
Screw on the encoder and set the
spring tension
Scan forwards or backwards with the
encoder mounted on the side
1.4
1.3
3.1
3.2
Rear Mounting
Side Mounting
C-Clamp Encoder
