Phoenix International VL1-250-SC-DS, Technical Information

Page: 7 / 24

Scope
This chapter describes the organization of this manual and gives an overview of the VL1-250-SC-DS.
Manual Organization
This manual is organized as follows:
Chapter 1 MANUAL ORGANIZATION AND INTRODUCTION
Contains an overview of the manual organization and provides a brief product description.
Chapter 2 FEATURES AND SPECIFICATIONS
Describes the product features, compatibility, and electrical specifications.
Chapter 3 CONFIGURATION, INSTALLATION AND OPERATION
Provides information on how to configure and install the VL1-250-SC-DS .
Chapter 4 SCSI HARD DISK DETAILS
Contains specific details about the hard disk drive used on the VL1-250-SC-DS .
Chapter 5 PRODUCT SUPPORT, SERVICE AND WARRANTY
Describes what to do if you have trouble and how we will support you.
VL1-250-SC-DS Introduction
The VL1-250-SC-DS has been designed to provide a complete disk drive subsystem which is mechanically compatible
with the VMEbus. It has been designed specifically to interface with VMEbus processors with an embedded Ultra 320
SCSI Host Adapter. Together with the processor, a complete system can be installed in only two standard VMEbus sys-
tem slots. The VL1-250-SC-DS provides one or two hard disk drives within the same module making it very convenient
to have fixed data storage. The drives used on board the VL1-250-SC-DS were chosen for their compatibility, rugged-
ness and reliability. The Ultra 320 SCSI bus can be connected to the module via the front panel 68 pin Wide SCSI
VHDCI connector or via the P2 connector.
Manual Organization and Introduction 1-3