Phoenix Gold ZX400ti, Web Manual

Page: 4 / 21

pg.
03
ZX Ti amp manual
Continuous Output Power at 1% THD (Wrms):
ZX600Ti
Into 4 ohms Stereo @ 12.5 Vdc (IASCA/USAC) 75 x 2
Into 4 ohms Stereo @ 14.4 Vdc 150 x 2
Into 2 ohms Stereo @ 14.4 Vdc 300 x 2
Into 4 ohms Bridged @ 14.4 Vdc 600 x 1
Minimum Speaker Load, Bridged 2 ohms
Minimum Speaker Load, Stereo 1 ohm
Recommended Fuse Size, Stereo 4 ohms / Stereo 2 ohms / Bridged 60 / 80 / 80 amp
Continuous Current Draw @ Full Power * 60 amps
Peak Current Draw @ Full Power ** 85 amps
Dimensions, Chassis (inches) 15.00 L x 9.00 W x 2.25 H
Dimensions, Overall (inches) 16.00 L x 10.00 W x 2.25 H
ZX400Ti
Into 4 ohms Stereo @ 12.5 Vdc (IASCA/USAC) 37 x 2
Into 4 ohms Stereo @ 14.4 Vdc 100 x 2
Into 2 ohms Stereo @ 14.4 Vdc 200 x 2
Into 4 ohms Bridged @ 14.4 Vdc 400 x 1
Minimum Speaker Load, Bridged 2 ohms
Minimum Speaker Load, Stereo 1 ohm
Recommended Fuse Size, Stereo 4 ohms / Stereo 2 ohms / Bridged 50 / 60 / 60 amp
Continuous Current Draw @ Full Power * 45 amps
Peak Current Draw @ Full Power ** 65 amps
Dimensions, Chassis (inches) 11.25 L x 9.00 W x 2.25 H
Dimensions, Overall (inches) 12.25 L x 10.00 W x 2.25 H
Common Specifications
Total Harmonic Distortion < 0.02 %
Signal to Noise Ratio (A-weighted) > 100 dB
Frequency Response +/- 1 dB, 20 Hz to 20 kHz
Bass Boost 0 to +18 dB @ 45 Hz
Crossover Frequency Range 40 Hz to 800 Hz
Crossover Slope 24 dB per octave
Input Sensitivity 200 millivolts to 6 volts
Input Impedance > 30 kohms
Input Voltage Range 0.2 volts to 6 volts
Power Supply Operating Range 10.5 Vdc to 15.5 Vdc
Typical current draw at idle < 3 amps
*Average continuous current draw when playing typical music material.
**Average peak current needed for musical peaks (<20ms) when playing typical music material.
Due to ongoing research and development, features, specifications and availability are subject to change without notice.
SPECIFICATIONS