background image

© 2021 Phoenix Gold | A Brand of AAMP Global

www.phoenixgold-eu.com

ZR6004 / ZR10001 / ZR20001

 - ZR-Series Amplifiers

Disclaimer

Always ensure the enclosure is securely attached, to avoid movement. PHOENIX GOLD accepts no responsibility for 

damage or injury in relation to inappropriate securing of this product.

Phoenix Gold Product Warranty

 

LIMITED WARRANTY ON AMPLIFIERS:
Phoenix Gold warrants this product to be free of defects in materials and workmanship for a period of one (1) years 

from the original date of purchase. This warranty is not transferable and applies only to the original purchaser from an 

authorized Phoenix Gold dealer in the United States of America only. Should service be necessary under this warranty 

for any reason due to manufacturing defect or malfunction, Phoenix Gold will (at its discretion) repair or replace 

the defective product with new or re-manufactured product at no charge. Damage caused by the following is 

not covered under warranty: accident, misuse, abuse, product modification or neglect, failure to follow installation 

instructions, unauthorized repair attempts, misrepresentations by the seller. This warranty does not cover incidental or 

consequential damages and does not cover the cost of removing or reinstalling the unit(s). Cosmetic damage due to 

accident or normal wear and tear is not covered under warranty. 

INTERNATIONAL WARRANTIES:
Products purchased outside the United States of America are covered only by that country’s Authorized Phoenix Gold 

reseller and not by Phoenix Gold. Consumers needing service or warranty information for these products must contact 

that country’s reseller for information. 

REV .11/21

ZR10001

Summary of Contents for ZR Series













Reviews: