Amplifier Owner’s Manual
© 2011 Phoenix Gold • www.phoenixgold.com
SD600.1 SPECIFICATIONS
Frequency Response:
± 1dB from 20Hz to 300Hz
Signal to Noise Ratio:
>90dB
Low Pass Crossover:
18dB per Octave
Subsonic Filter:
12dB per Octave
Low Pass Crossover Range:
30Hz to 300Hz
Subsonic Crossover Range:
10Hz to 55Hz
Bass Boost @ 45Hz:
0 to +18dB
Low Level Input Range:
200 millivolts to 8 volts
Lowest Recommend Load:
1 ohm
Typical Efficiency:
70%
Damping Factor:
Greater than 200
SD500.4 SPECIFICATIONS
Frequency Response:
± 1dB from 20Hz to 20kHz
Signal to Noise Ratio:
>100dB
High and Low Pass Crossovers:
12dB per Octave
Crossover Range:
40Hz to 400Hz
Bass Boost @ 45Hz: 0 to +18dB
Low Level Input Range:
200 millivolts to 8 volts
Lowest Recommend Load:
4 ohm Bridged or 2 ohm Stereo
Typical Efficiency:
70%
Damping Factor
Greater than 200
RMS Power 14.4Vdc ≤ 1% THD
400 x 1 @ 2 ohm
600 x 1 @ 1 ohm
Dynamic Power 14.4Vdc >1% THD
600 x 1 @ 2 ohm
800 x 1 @ 1 ohm
Recommended Fuse Size:
60 Amp
Power/Ground Wire Size:
4 Gauge
Dimensions (Includes Mounting Feet): 11.6” L x 7.1” W x 2.0” H
RMS Power 14.4Vdc ≤1% THD
75 x 4 @ 4 ohm Stereo
125 x 4 @ 2 ohm Stereo
250 x 2 @ 4 ohm Bridged
Dynamic Power 14.4Vdc >1% THD
90 x 4 @ 4 ohm Stereo
150 x 4 @ 2 ohm Stereo
300 x 2 @ 4 ohm Bridged
Recommended Fuse Size:
50 amp
Power/Ground Wire Size:
8 Gauge
Dimensions (Includes Mounting Feet):
11.6” L x 7.1” W x 2.0” H
Specifications
SD800.5 SPECIFICATIONS
Frequency Response:
± 1dB from 20Hz to 20kHz
Signal to Noise Ratio:
>100dB
High Pass Crossovers:
12dB per Octave
Low Pass Crossover:
18dB per Octave
High Pass Crossover Range:
15Hz to 250Hz
Low Pass Crossover Range:
30Hz to 300Hz
Bass Boost @ 45Hz: 0 to +18dB
Low Level Input Range:
200 millivolts to 8 volts
Front and Rear Channels Lowest Load: 4 ohm Bridged or 2 ohm Stereo
Subwoofer Channel Lowest Load:
2 ohm
Typical Efficiency:
70%
Damping Factor
Greater than 200
RMS Power 14.4Vdc ≤1% THD
75 x 4 @ 4 ohm Stereo
125 x 4 @ 2 ohm Stereo
250 x 2 @ 4 ohm Bridged
plus
200 x 1 @ 4 ohm
300 x 1 @ 2 ohm
Dynamic Power 14.4Vdc >1% THD
90 x 4 @ 4 ohm Stereo
150 x 4 @ 2 ohm Stereo
300 x 2 @ 4 ohm Bridged
plus
300 x 1 @ 4 ohm
400 x 1 @ 2 ohm
Recommended Fuse Size:
60 amp
Power/Ground Wire Size:
4 Gauge
Dimensions (Includes Mounting Feet):
13.1” L x 7.1” W x 2.0” H
