E N C L O S U R E R E C O M M E N D A T I O N S
The
Xenon
subwoofers are over-engineered and overbuilt in virtually
every way conceivable. It’s very important that the enclosure is built
to these same exacting standards. The enclosure must be made
of .75 inch MDF. Screws or air staples are excellent construction
fasteners when used with a strong bonding “yellow” wood working
glue that can fill joint gaps. Be sure that the enclosure panels are
airtight at all joining seams. Lining the walls with a polyester matting
1 to 3 inches thick is sufficient.
Your PG dealer has extensive knowledge, tools and the experience
needed for the design and construction necessary for your
Xenon
subwoofer application. We also recommend you consult with your
dealer for specific technical assistance related to your installation.
The charts provided should be used as a reference when building an
enclosure for your
Xenon
subwoofer.
The charts contain several enclosure types. The Musical enclosure
provides deeper, tighter and higher quality output to provide a more
accurate reproduction of the original source material. The SPL
enclosure, on the other hand, fits the basshead’s needs of maximum
output while sacrificing some sound quality.
L
E
D
I
N
S
T
R
U
C
T
I
O
N
S
E
N
C
L
O
S
U
R
E
I
N
F
O
R
M
A
T
I
O
N
The
Xenon
subwoofer was developed from the ground up to
compliment the amazing performance of our
Xenon
Series
amplifiers. Utilizing cutting edge design techniques, we can deliver a
woofer that has an impressive peak to peak linear field excursion of
up to 40mm. The injection-molded 8 piece dust cap in conjunction
with the custom injection-molded polypropylene cone provides
exceptional musicality at very high drive levels. All of the motor (Xe.
drive) and suspension (Xe.linear) parts have been computer optimized
to provide symmetrical driving force in both directions. This translates
into very low distortion and exceptional output even as your amplifier
is running out of steam.
*The above enclosures include the driver displacement.
*The above enclosures include the driver displacement.
8 piece custom
tooled injection
molded dust cap
assembly
Injection-Molded custom
tooled Polypropylene cone
with integrated Dust cap
landing
Reversible Injection-Molded
Rubber Mounting Gasket
Four Layer 2.5 Inch Voice Coil
Dual Custom-Tooled
Computer-Optimized
Linear SpiderS
Large, 125 Ounce, Y33 Grade
Computer Optimized
Motor Structure
Heavy Duty Cast Aluminum Basket
Injection-Molded Rubber
Motor Housing with
integrated Expanded Metal
Venting.
Small Terminal:
LED power
+ = Switched 12 Volt Power
- = Ground
Hex Terminal:
voice coil 1
10d2/10d4
12d2/12d4
Mounting Depth
6
1/2
in
6
7/8
in
Mounting Diameter
9
3/16
in
11
1/4
in
Overall Diameter
11
1/16
in
13
1/16
in
W O O F E R D I M E N S I O N S
Vented
Sealed
Custom tooled Spider
Dual Spider housing
with integrated Hex Bolt
Speaker Terminal
Super Brite™
Blue LED
volume
ft3
volume
ft3
port
diameter
port
length
volume
ft3
volume
ft3
port
diameter
port
length
0.50
1.65
2.5
1.5
3´´
3´´
7´´
11.25´´
SPL
Musical
Vented
Sealed
X 1 0 d 2 / X 1 0 d 4
X 1 2 d 2 / X 1 2 d
9.5´´
11.2´´
3´´
4´´
2.0
3.2
2.2
0.9
• Xe.drive™ magnetic flux regulation circuit - ultra low distortion
• Xe.linear™ suspension technology - true 34mm peak to peak excursion
• Xe.flex™ outrageous cosmetics, reliability, invertibility with reversible mounting
gasket and computer optimized to work in most sealed and vented enclosures
• Computer optimized dual spider assembly
• Custom tooled spider spacer ring with integrated speaker terminal
• Dual 5mm blue superbrite LED’s
• Cast aluminum basket
• 2.5 inch high temperature voice coil
• 8 piece injection molded polypropylene dust cap
F
E
A
T
U
R
E
S
S
P
E
A
K
E
R
A
N
A
T
O
M
Y
S
P
E
A
K
E
R
D
E
S
I
G
N
Hex Terminal:
voice coil 2
All Rubber Elements on these
speakers have been pre-treated
by Meguiar's product.
