THERMOMARK ROLLMASTER
PHOENIX CONTACT
107815_en_00
A 3
FCC
NOTE: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. The equipment generates,
uses, and can radiate radio frequency and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user may be required to correct the interference at his own expense.
Ethernet
LPD, IPv4, IPv 6, RawIP printing, DHCP, HTTP, FTP, SMTP,
SNMP, TIME, NTP, Zeroconf, SOAP web service
WLAN
WLAN 802.11b, g, n, Access Point Mode or Station Mode
2.4 GHz
I/O interface IEC/EN 61131-2
Integrated
Interfaces
Software
Windows driver
Windows Vista, Windows 7, Windows 8, Windows 8.1, Win-
dows 10, Server 2003, Server 2008, Server 2008 R2, Server
2012, Server 2012 R2, stand-alone operation
Planning and marking software
CLIP PROJECT advanced / professional
Operating data
Voltage
100 V AC ... 240 V AC, 50/60 Hz
Power consumption
Maximum 300 W
Operating temperature
+10°C ... +40°C
Humidity
10 % ... 85 %, non-condensing
