11.
Navigate to the Secondary External menu and choose “Built
-
in mobile network modem” under
the network mode drop down menu.
12.
Set the operation mode to temporary so that the cellular interface is only active if the Internet
connection via the WAN port fails
a.
Note: Operation mode permanent will disable the connection via the WAN port and use
the cellular interface as the primary connection.
13.
Configure secondary external interface probes. These probes are pings sent to a defined address
through the WAN port to check the internet connection. If a defined number of probes fail, the
TC mGuard RS4000 4G will turn on the cellular interface until the probes succeed again.
a.
For more information on the types of probes, click the question mark help icon in the
upper right-hand corner.
14.
Click save in the upper right-hand corner
15.
Proceed to the last section:
Summary of Contents for TC mGuard 4G Series
Page 6: ...V00 Originalpublication...
