Phoenix Contact IOL MA8 PN DI8, User Manual

Page: 51 / 84

Web manager interface
4022_en_A PHOENIX CONTACT
49
IO-Link test event generator
Use the “Test Event Generator” function to send messages to an IOL MA8 PN DI8 port. The
generated events are displayed in the “IO-Link Settings” page under the “Last Events” field
and the syslog file. This can test a port to verify that it is functioning correctly.
Figure 5-18 “IO-Link Test Event Generation” group expanded
Table 5-8 describes the types of event that can be generated.
Table 5-8 IO-Link Test Event Generator Descriptions
Field name Function
Port The port number to send an event.
Mode This is the first item in the event generated.
– Single: generates Single in the event.
– Coming: generates Active in the event.
– Going: generates Cleared in the event.
Type This is the second item in the event generated.
– Message: generates Message in the event.
– Warning: generates Warning in the event.
– Error: generates Error in the event.
Instance This is the level in which the event is generated. This is not displayed in the
generated event.
– unknown
– physical
– datalink
– applayer
– application