Phoenix Contact IB IL 24 PSDO 8-PAC, User Manual, Page: 18 / 112

IB IL 24 PSDO 8-PAC
18 / 112
PHOENIX CONTACT 7619_en_05
2.2 Structure of the safety module
Figure 2-1 Structure of the safety module
1 Data jumpers (local bus)
2 Electronics base with labeling including version designation hardware/firmware/firm-
ware (not shown)
3 Switch for setting the transmission speed and the operating mode
4 Switch for setting the protocol and address
5 Potential jumper
6 Diagnostic and status indicators; for assignment and meaning see Section “Local diag-
nostic and status indicators” on page 23
7 Inline connector; for assignment see Section “Terminal point assignment” on page 35
8 Terminal points
9 Marking field
For more detailed information about setting the switches, please refer to Section “Setting
the DIP switches” on page 40.
4x
4x
1
2
3
7 8
9
1 2
PS
DO
8
0
1 2
1
1 2
2
1 2
3
D
6
76192002
FS
UM
500KBD
2MBD
Mode2
Mode1
9
87
65
43
21
0
4
5
P