Phoenix Contact IB IL 24 PSDO 8-PAC, User Manual, Page: 35 / 112

Inline potential and data routing, and Inline connectors
7619_en_05 PHOENIX CONTACT
35 / 112
3.4 Terminal point assignment
Figure 3-2 Terminal point assignment
The Inline connectors are supplied with the module. They are coded and marked accord-
ingly for connection to prevent polarity reversal. If other plugs are used according to the or-
dering data, they must also be coded.
The following applies for the tables below:
– All outputs are safe digital outputs
– 0 V (GND): common ground of outputs
– FE: Common functional earth ground
Only use the plugs supplied with the module or plugs that are approved as replacement
items (see “Ordering data: Accessories” on page 88).
Table 3-1 Terminal point assignment for plug 1
Terminal point Signal Channel assignment LED
1.1 OUT0_Ch1 Output 0, channel 1 0.1
2.1 OUT0_Ch2 Output 0, channel 2 0.2
1.2 not used
2.2 not used
1.3 0 V (GND)
Channel 1 and channel
2
2.3 0 V (GND)
Channel 1 and channel
2
1.4 FE
2.4 FE
73410004
1 2
1.1
1.2
1.3
1.4
2.1
2.2
2.3
2.4
1 2
3.1
3.2
3.3
3.4
4.1
4.2
4.3
4.4
1 2
5.1
5.2
5.3
5.4
6.1
6.2
6.3
6.4
1 2
7.1
7.2
7.3
7.4
8.1
8.2
8.3
8.4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1.1
1.2
1.3
1.4
8.1
8.3
8.4
8.2