onlinecomponents.com
5663BC01
1
IB IL 24/230 DOR 1/W
09/2001
Data Sheet 5663BC01
This data sheet is only valid in
association with “Configuring and
Installing the INTERBUS Inline
Product Range” User Manual
IB IL SYS PRO UM E.
Function
The terminal is designed for use within an
INTERBUS Inline station. It has a relay
changeover contact that is electrically isolated.
The terminals can be used in the
SELV (low voltage) area and in the AC
area. Observe the appropriate
conditions and safety notes when
using the terminal in the AC area.
Features
–
Safe isolation according to EN 50178
–
Electrically isolated connection for an
actuator
–
Nominal current at the output: 3 A
–
Total current of the terminal: 3 A
–
Diagnostic and status indicators
Figure 1
IB IL 24/230 DOR 1/W
terminal with connector
Please note that the connector is not
supplied with the terminal. Please
refer to ordering data on page 17 to
order the appropriate connectors for
your application.
5 6 6 3 A 0 0 2
5 6 6 3 A 0 0 1
INTERBUS Inline Terminal
With One Relay Changeover Contact
Applies to terminals with hardware version 01 and later.
