Installation
108452_en_02
PHOENIX CONTACT
2-11
2.2.1
DIN rail mounting
The FL EPA RMS mounting kit (Order No. 2701133) is available as an accessory for mount-
ing the device on a 35 mm DIN rail.
Figure 2-2
Fixing the EPA to the mounting kit for the DIN rail
•
Use the two screws provided to fix the EPA to the base plate.
•
Place the EPA with the adapter on the top edge of the DIN rail.
•
Push the EPA towards the DIN rail until it snaps into place.
•
For releasing the adapter from the DIN rail, pull the latch downwards using a screw-
driver and simultaneously remove the EPA from the DIN rail.
2.2.2
Wall or mast mounting
The FL EPA WMS (Order No. 2701134) mounting kit can be used for EPA wall or mast
mounting.
Figure 2-3
Fixing the EPA to the mounting kit for wall/mast mounting
