FL WLAN EPA 2
4-22
PHOENIX CONTACT
108452_en_00
Subnet Mask
- Subnet mask when using a static IP address
Default Gateway
- Default gateway when using a static IP address
Internal DHCP Server
Disabled: No internal DHCP functionality
DHCP Relay Enabled: DHCP requests from connected devices are forwarded using the
DHCP relay protocol.
DHCP Server Enabled: Activates the internal DHCP server. This option is only available if
“IP Assignment” is set to “Static”.
The internal DHCP server will assign up to seven consecutive IP addresses, starting with
the start address specified. If the device itself is located within the DCHP range, its IP ad-
dress will be skipped and the next IP address will be assigned instead.
If the static IP address is changed, the browser is automatically redirected to the new ad-
dress after clicking on “Save and Reboot”.
The automatic redirect function may
not
be
supported by
all
browsers.
4.1.4
WLAN settings – Client mode
Figure 4-5
“WLAN Settings” web page
DHCP requests from connected devices are forwarded in both settings “Disabled” and
“DHCP Relay”. Make sure that the selected protocol is supported by the DHCP server on
the network. Select “Disabled” if in doubt. The behavior is then similar to that of a direct
network connection.
Do
not enable this
option if there
is already a DHCP server on
the
network!
First select the operating mode (“Access Point” or “Client”). Depending on the selection,
there are different input fields available.
