Phoenix Contact 1136419, User Manual, Page: 35 / 130

Description of the controller
110146_en_00 PHOENIX CONTACT
35 / 128
Figure 4 - 12 Messages “LAN Setting changed” and “Restart: for new LAN settings”
Please note :
The modified setting will not take effect until the controller has been restarted.
The modified (system) IP address settings are stored on the SD card of the controller.
The message “LAN Setting changed” disappears automatically. The message “Restart: for
new LAN settings” then appears in the display ( B in Figure 4 - 12 ).
• To apply the modified setting, restart the controller.
Canceling changes If you do not wish to apply the modified setting, you can cancel the modification procedure.
• To cancel the modification procedure, tap .
⇒ The message “Nothing changed” appears in the display.
Figure 4 - 13 “EDIT LANX” submenu, message “Nothing changed”