background image

Back

Front

www.phoenix-baby.com

www.phoenix-baby.com

Phoenix Baby, LLC.
c/o RBO, LLC.
PO BOX  91058
ALLENTOWN PA 18109-9917

Manufacturer's Contact Information/Coordonnées du fabricant

Phoenix Baby, LLC. (

c/o RBO,

 

LLC.)

501 S 9TH Street, Reading, PA 19602 USA

 Customer Care: 1-800-704-9058

E-Mail: [email protected]

www.phoenix-baby.com 

Product Model/Modèle de produit#: 

Shipment Ref./Réf. d'Expédition#:

Manufacture Date/date de fabrication: 

KEEP THIS TOP PART FOR YOUR RECORDS. 

FILL OUT AND RETURN BOTTOM PART.

GARDER CETTE PARTIE SUPÉRIEURE POUR VOS DOSSIERS.

REMPLIR ET RENVOYER PARTIE INFÉRIEURE.

Name/nom

Mailing Address/Mailing Address

City/ville

Zip Code/Code postal

State/état

Telephone Number/numéro de téléphone

E-mail Address/Adresse E-mail

Product Model

#: 

Shipment Ref./Réf. d'Expédition#:
Manufacture Date/date de fabrication: 

/Modèle de produit

3D

To fold.

Lift up both latches at the same time. Continue to 
lift until product is folded.

Place in travel back, seat area first. Once fully 
bag, pull cord to close.

 AVOID FINGER ENTRAPMENT : Use care 

when folding and unfolding the GoTo. Be certain 
GoTo is fully erected and latched before allowing 
yo child near the GoTo.

Warning:

PRODUCT REGISTRATION

IMPORTANT:

 Please fill in your contact info on the bottom part of the card, 

separate from top card and mail to us. Note, postage is prepaid if mailed in the 
United States. Keep the top portion for your records. This information is important 
to us should we need to contact you regarding the safety of this product.

10

Summary of Contents for GoTo GT201












Reviews: