CONNECTING TO AN ANALOG PHONE LINE
For any session using a PSTN/POTS/ANALOG phone line.
‣
Using the telephone cable provided, plug one end of the cable into the Spider’s RJ11
telephone jack (TEL connector located on the connector panel below the unit).
‣
Plug the other end of the cable directly into your telephone-line wall socket.
‣
Connect the provided Power Supply to the AC connector located on the connector panel
below the unit. Once you plug the Power Supply into a power source, your Spider is
ready for use.
USING THE SPIDER
DIALING
‣
If the keypad is dimmed, press any key to turn on the backlight.
‣
Dial the desired number and press . .
OR
‣
Press to get a dial tone. The screen will display the last dialed number. Press
again to redial, or dial any new number at will.
INCOMING CALL
When the Spider receives an incoming call, the display will notify you of the caller ID, a ringtone
will play, and the grill lights will flash blue.
TAKE CALL
Press
OR
the left function button .
REJECT CALL
Press
OR
the right function button (this will hang-up the call).
SILENCE CALL
Press the middle function button (the Spider will continue ringing, only without an
audible ringtone).
Page 5
