Pivot-TC/500 Specifications
API 500 series compatible rack unit:
Class A (DSOP2) Output specs
.
Frequency response: 20Hz to 20k +/ - 0.5dB.
Maximum Output = +26dBu @ 1kHz
Noise = -90dB @ 20Hz to 20kHz.
Phoenix Audio’s unique Class A, transformer-less, True electronically balanced
input stage.
Typical Headroom:
+26dB on output stage
Input connections:
XLR input on rear of API compatible rack and TS 1/4"
Jack on front for DI input & TS through input.
Output connections:
XLR output on rear of API compatible rack
High Input Impedance DI: Mono 1/4" Jack on front panel
DI Stage gain: Maximum of 30dB gain range
Gain Meter:
LED output Metering. (Green = -4dbu, to +10dBu in 2db increments,
Yellow = +12dbu Red= +14dBu)
Pivot ‘Tilt style’ EQ controls
: Rotary switch with 3 pivot points : Bypass, 160hz,
800hz & 1.6khz.
Toggle Switch
: Allowing Line level mode or DI mode
Dark/bright control
: Rotary control allowing the degree of tilt on each frequency,
more dark control will boost LF and reduce HF and more bright control will boost
HF and reduce LF
Output Level
: An output fader which will allows you to control the output level.
Power requirements:
The Pivot-TC/500 utilizes the rack's +16V and -16V power
rails, but uses our unique on-board power supply to convert the rails to +24V
and 0V so that the unit sounds exactly the same as our mains-powered 19” units.
This means you always know that the Phoenix sound is consistent across our
whole range of products.
