SETTING DELAY
NOTE:
Making sure that your Condor’s delay is set properly is crucial to the performance of the
echo canceler. If you’re experiencing echo while operating the Condor, chances are that your
delay is not set properly.
WHAT IS DELAY
Delay is when the sound coming out of the speakers is not in sequence with the reference
speaker's signal that is coming into the Condor. This will cause the echo canceler to fail.
WHY IS THERE DELAY
Sound delay occurs when a TV signal tries to make up for its video processing time by artificially
stalling the audio. This feature is embedded in every TV by its manufacturer. The delay in all
TVs will differ.
SYNCING THE DELAY
When plugging the Condor to a TV, make sure to first connect the speakers before powering the
unit. Once the Condor is powered, it will automatically play chirping sounds (four signals) that it
will use in order to calculate the delay. After calculating the delay, the Condor will automatically
set its delay time. This setting will be saved and used unless changed manually. Please note
that next time you power your Condor it will not replay the signals.
If for some reason the Condor did not automatically set its delay time, or if you are using a
different TV, you can manually set, change, or reset the delay time by using the Phoenix Audio
Testing Wizard located on our website:
www.phnxaudio.com/downloads/testingwizard/
Page 9
Summary of Contents for CONDOR MT600
Page 1: ...CONDOR MT600 USER MANUAL ...
Page 12: ...Page 12 ...
