960018 Rev A © 2009 Luminus Devices, Inc. All rights reserved.
Page 1
Introduction:
PhlatLight LEDs, from Luminus Devices, have been
designed from the ground up to enable a new class of
illumination and projection systems. Benefiting from a
suite of innovations in chip technology, packaging, and
thermal management, PhlatLight LEDs allow designers to
achieve efficient light engine designs and deliver high
brightness solutions.
The DK-409N series of PhlatLight Development Kits was
designed for fast and simple evaluation of PhlatLight
products. The included electrical and thermal solutions
enable customers to easily breadboard or prototype their
system without time consuming and costly development
of driver boards and heat sinks.
Capable of providing up to 9A and designed to work with
all CBM series parts and their associated applications,
the DK-409N development kits support various different
drive conditions and use scenarios.
This plug and play solution can easily be
connected to common laboratory equipment through
standard connectors and allows system designers to save
weeks in their development cycles.
Table of Contents:
1.
Key Features 2
2.
Development Kit Contents 2
2.1
Heat Sink 3
2.2
Development Board 3
2.3
Cable Assembly 3
2.4
Thermal Interface Material and Mounting
Hardware 3
3.
User Instructions 4
3.1
Electrical Connections 4
4.
Operating Instructions 5
4.1
Operation in Constant Current Mode 6
4.2
Operation in Triggered Mode 6
4.3
Operation in PWM Mode 7
PhlatLight LED
Development Kit Manual
DK-409N Series
This datasheet has been downloaded from
at this
