14
English
3140 115 31851
CD Operation
IMPORTANT!
The lens of the CD player should never be
touched.
X
Playing a disc
This CD player plays Audio Discs including CD-
Recordables and CD-Rewritables.
●
CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.
1
Select
CD
source.
2
Press
OPEN•CLOSE
3
on
the top
of the system to open the CD
compartment.
➜
OPEN
is displayed when
you
open the CD compartment.
3
Insert a disc with the printed side facing up and
press down on
OPEN•CLOSE
3
to close the
CD door.
➜
READ
is displayed as the CD player scans the
contents of a disc, and then the total number of
tracks and playing time are shown.
4
Press
PLAY•PAUSE
2;
(on the remote
control
2;
) to start playback.
➜
Current track number and elapsed playing
time of the track are displayed during disc
playback.
5
To interrupt playback press
PLAY•PAUSE
2;
(on the remote control
2;
). Press
PLAY•PAUSE
2;
(on the remote control
2;
)
again to resume play.
➜
The display freezes and the elapsed playing
time flashes when playback is interrupted.
6
To stop disc playback, press
STOP
9
.
Note: CD play will also stop when;
– the CD door is opened.
– the disc has reached the end.
– you select another source: TAPE, TUNER, AUX or
standby.
Selecting a different track
●
Press
PREV
¡1
or
NEXT
2™
(on the remote
control
¡
or
™
) once or repeatedly until the
desired track number appears in the display.
●
If you have selected a track number shortly after
loading a disc or in the PAUSE position, you will
need to press
PLAY•PAUSE
2;
(on the
remote control
2;
) to start playback.
Finding a passage within a track
1
Press and hold down on
PREV
¡1
or
NEXT
2™
(on the remote control
à
or
á
).
➜
The disc is played at high speed and low
volume.
2
When you recognise the passage you want,
release
PREV
¡1
or
NEXT
2™
(on the
remote control
à
or
á
).
➜
Normal playback continues.
Note:
– During a disc programme or if SHUFFLE/
REPEAT active, searching is only possible within the
same track.
