4
Introduction to this guide
Thank you for choosing the Philips Xtreme Surge
Protector I
.
This product will help protect your
Outdoor luminaires against destructive spikes and
transients, including high voltage and high current
surges caused by indirect lightning strikes. This
Design-in Guide provides instructions on how to
install the Xtreme Surge Protector in your luminaire.
Information or support
If you require any further information or support
please consult your local Philips office or visit:
Support
www.philips.com/support
Xitanium drivers
www.philips.com/xitanium
OEM general info
www.philips.com/technology
Attention point
• Do not use damaged or defective contacts or
housings.
• Do not use damaged products.
• Do not service the Xtreme Surge Protector when
the mains voltage is connected.
• The luminaire manufacturer is responsible for its
own luminaire design, this has to comply with all
relevant safety standards.
• The Xtreme Surge Protector
I
is intended for built-
in
use and should not be exposed to the elements
such as snow, water and ice. It is the luminaire
manufacturer’s responsibility to prevent exposure.
Design-in support is available; please contact your
Philips sales representative.
Warning:
• Before installation or maintenance, switch off the
power
• Avoid touching live parts
