Philips Xenium, User Manual

Page: 23 / 73

Using your phone
20
Activate/deactivate the silent mode
If you do not want your phone to ring when you receive a call, activate the silent ringer.
If you receive a call while the silent mode is activated, the symbol flashes, the green
LED flashes quickly, and the display shows
Incoming call
, but the phone does not ring.
In idle screen:
L
NOTE
Silent mode can be assigned to a hotkey (see page 44).
Activate/deactivate the vibrator
If you have the Vibra battery and if you have set the function, your phone vibrates when you
receive an incoming call.
In idle screen:
Using the Vibra battery doesn’t mute the ringer. If you want to mute it and keep only the
vibrator function active, set the quick setting
Silence .
L
NOTES:
1. The Vibrator option is only available if a vibrating battery is installed (see batteries page 62).
2. The Vibrator Setting is independent from the ringer. You can activate both at the same time.
Reading your GSM phone number
In idle screen:
L
NOTE:
If your own number has been stored in the Names list, you can read it during a call. See “Consulting the
Names list”. page 19.
• Press the Pilot Key , select the Settings menu, Sounds , Ringer
volume , then, with the Pilot Key, adjust Ringer volume to silent.
Press the Pilot Key to confirm.
• The ringer is deactivated. To reactivate the ringer, repeat the above sequence and select
the required volume.
• Press the Pilot Key , select
Settings
,
Sounds
then
Vibrator
.
• Move the Pilot Key up or down to select
On
or
Off
and press the Pilot Key
to confirm.
• Press the Pilot Key .
• In the
Names
menu, move the Pilot Key until you reach
Own num.
then
press the Pilot Key .
• Your phone number is displayed if it is present on your SIM card. If not, select
New
then
follow the instructions on the screen.