GB7
WelcomeEye Comfort / Compact / 08/17
instructions which can be downloaded at www.philips.com.
Warning:
during this step, do not connect the power supply to the 230V AC
4. Installing the main or additional
intercom panel
Warning:
The product must not be connected to the power supply before wiring is complete.
DES 9900 VDP
5
1 0 0 6
3
1 2 3 4 5 6
1
2
7 8
1
2
1
2
DES 9900 VDP
5
1 0 0 6
3
M
ad
e
in
P
.R
.C
CFI Extel
ZI de Fétan, 01600 Trévoux
FRANCE
IP44
20V 110mA
RFID 125kHz
1m60
1
1
2
2
1
2
4
7
5
3
6
8
9
1 - Remove the tamper-resistant screw from the intercom panel.
2 - Tip the intercom panel cover forward.
3 – The intercom’s lens should be approximately 1.60m above the ground.
4 – Mark the locations.
5 - Drill.
6 - Use pegs adapted to the nature of the support (the screws supplied are suitable for
solid walls).
7 – Connect the two wires from the monitor and, if necessary, connect the electric strike
