background image

VIDEO CASSETTE RECORDER

90 Days Free Labor/One Year Parts Exchange.  This product must be carried in for repair.

WHO IS COVERED?
You must have proof of purchase to receive warran-
ty service. A sales receipt or other document show-
ing that you purchased the product is considered
proof of purchase.

WHAT IS COVERED?
Warranty coverage begins the day you buy your
product. For 90 days thereafter, all parts will be
repaired or replaced, and labor is free. From 90 days
to one year from the day of purchase, 
all parts will be
repaired or replaced, but you pay for all labor
charges. After one year from the day of purchase, you
pay for the replacement or repair of all parts, and for
all labor charges.
All parts, including repaired and replaced parts, are
covered only for the original warranty period. When
the warranty on the product expires, the warranty
on all replaced and repaired parts also expires. 

WHAT IS EXCLUDED?
Your warranty does not cover:
• labor charges for installation or setup of the prod-

uct, adjustment of customer controls on the
product, and installation or repair of antenna sys-
tems outside of the product.

• product repair and/or part replacement because

of misuse, accident, unauthorized repair or other
cause not within the control of Philips Consumer
Electronics Company.

• reception problems caused by signal conditions or

cable or antenna systems outside the unit.

• a product that requires modification or adaptation

to enable it to operate in any country other than
the country for which it was designed, manufac-
tured, approved and/or authorized, or repair of
products damaged by these modifications.

• incidental or consequential damages resulting from

the product. (Some states do not allow the exclu-
sion of incidental or consequential damages, so
the above exclusion may not apply to you. This
includes, but is not limited to, prerecorded mater-
ial, whether copyrighted or not copyrighted.)

• damage caused by the use of non-VHS tapes or

tapes that have not been tested and labeled for
use in two, four, six, and eight hour VHS
recorders.

• a product that is used for commercial or institu-

tional purposes (including but not limited to rental
purposes).

WHERE IS SERVICE AVAILABLE?
Warranty service is available in all countries where
the product is officially distributed by Philips
Consumer Electronics Company. In countries where
Philips Consumer Electronics Company does not dis-
tribute the product, the local Philips service organiza-

tion will attempt to provide service (although there
may be a delay if the appropriate spare parts and
technical manual(s) are not readily available).

MAKE SURE YOU KEEP...
Please keep your sales receipt or other document
showing proof of purchase. Attach it to this owner’s
manual and keep both nearby. Also keep the original
box and packing material in case you need to return
your product.

BEFORE REQUESTING SERVICE...
Please check your owner’s manual before requesting
service. Adjustments of the controls discussed there
may save you a service call.

TO GET WARRANTY SERVICE IN U.S.A., 
PUERTO RICO OR U.S. VIRGIN ISLANDS...
Take the product to a Philips factory service center
(see enclosed list) or authorized service center for
repair. When the product has been repaired, you
must pick up the unit at the center. Centers may
keep defective parts.
(In U.S.A., Puerto Rico and U.S. Virgin Islands, all
implied warranties, including implied warranties of
merchantability and fitness for a particular purpose,
are limited in duration to the duration of this
express warranty. Because some states do not allow
limitations on how long an implied warranty may last,
this limitation may not apply to you.)

TO GET WARRANTY SERVICE IN CANADA...

Please contact Philips at:

1-800-661-6162 (French Speaking)
1-800-363-7278 (English Speaking)

(In Canada, this warranty is given in lieu of all other
warranties. No other warranties are expressed or
implied, including any implied warranties of mer-
chantability or fitness for a particular purpose. Philips
is not liable under any circumstances for any direct,
indirect, special, incidental, or consequential damages,
howsoever incurred, even if notified of the possibility
of such damages.)

REMEMBER...
Please record below the model and serial numbers
found on the product. Also, please fill out and mail
your warranty registration card promptly. It will be
easier for us to notify you if necessary.

MODEL # __________________________________

SERIAL # __________________________________

This warranty gives you specific legal rights. You may
have other rights which vary from state to state.

Philips Service Solutions Group,  P.O. Box 555,  Jefferson City, Tennessee 37760,    (423) 475-8869

EL4946E008 / MAC 6108/ 1-98

52  Limited Warranty

VRZ263(H1955).QX33  4/9/99 9:43 AM  Page 52

Summary of Contents for VRZ263AT

























































Reviews: