manualshive.com logo in svg

Philips VRX262AT, Owner'S Manual

Share
Download
Philips VRX262AT Owner'S Manual Download Page 24

24  Playing

•  If the tape you want to play is

already in the VCR, make sure the
VCR power is on and the VCR light
is on, then press the PLAY button.

•  Other playback options and fea-

tures are on pages 37-41.

Helpful Hints

Read and follow the steps below to play a tape.

1

Turn the TV on and set it to channel 3 or 4, whichever the
CH3/CH4 switch on the back of the VCR is set to.

2

Insert a tape in the VCR. The power will come on. The VCR
will place itself in VCR position automatically (the VCR light and
the Cassette-Inside light on the display panel of the VCR will
appear).  If the tape’s record tab has been removed, playback will
start automatically.

6

When playback is stopped, press the EJECT button on the
remote control or the STOP/EJECT button on the VCR
again to remove the tape.

3

If playback does not start automatically, press the PLAY
button to start playback.

4

Press the STOP button on the remote control or the
STOP/EJECT button on the VCR once to stop playback.

5

Press the REW(ind) button on the remote control or the
REW(ind) button on the VCR to rewind the tape.

3

4

5

1

Turn on the TV.

2

Insert a tape in the VCR.

6

REW

PLAY

POWER

VCR PLUS+

SPEED

VCR/TV

EJECT

CHANNEL

REC/OTR

STATUS/EXIT

SLOW

PAUSE/STILL

MENU

CLEAR

MEMORY

STOP

F.FWD

1

2

3

4

5

6

7

8

9

0

+100

TIME SEARCH

Summary of Contents for VRX262AT





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands