Philips VR870CC/07, Instruction Manual, Page: 57 / 63

52
Switching the modulator on / off
If you cannot clear picture or sound interference despite optimisation, you can switch off the
built-in modulator.
Warning:
this is only possible if you have connected the video recorder to the TV set with a
scart cable. Without a scart cable you will not receive a picture from the video
recorder on the TV set when the modulator is switched off.
1
Switch on the TV set. If required, select the programme number for
the video recorder.
2
Press STOP/EJECT
?
to eject any cassette that might be in the
device.
3
Hold the STOP
h
button on the remote control.
In addition press the STOP/EJECT
?
button on the video
recorder until the pre-set modulator frequency e.g. '
M583
' (583MHz
or UHF channel 35) appears in the display.
OPTIMIZE MODULATOR
OPTIMIZE FREQUENCY 583 p
MODULATOR ON
________________________________
EXITpMENU
STOREpOK
4
Select the line '
MODULATOR
' on the TV screen or '
MOD+
' in the
display with P
;q
or P
=r
.
5
Select '
OFF
' on the TV screen with
Q
or in the display '
MOD-
'
(modulator off).
How can I switch the modulator back on?
In the display, select '
MOD+
' (modulator on) with
Q
.
6
Confirm with OK .
7
To end, press MENU .
Suppressing interference