O
PTIMIZING THE MODULATOR
E
NGLISH
48
48
O
Oppttiim
miizziinngg tthhee m
moodduullaattoorr
If the TV set and the video recorder are only connected with an
aerial cable - rather than with an additional scart cable - it may
happen that in certain reception locations the modulator fre-
quency of the video recorder is occupied by a TV channel. As
soon as the video recorder is switched on, the reception quality
of the TV picture deteriorates.The following steps will show you
how to overcome this problem.
SSuupppprreessssiinngg iinntteerrffeerreennccee
11
11
T
TIIPP
W
Whhaatt iiss aa m
moodduullaattoorr??
The purpose of this electronic assembly inside your
video recorder is to pass on the picture and sound
information read in from the video tape via an aerial
cable like a TV signal to the TV set.The modulator fre-
quency determines the frequency range in which these
signals are transmitted.
1
Switch the video recorder on and make sure
there is no cassette in the video recorder
3
The video recorder will now transmit a test
image on this frequency
2
Press simultaneously the SSTTO
OPP button
h
on
the remote control and the
SSTTO
OPP//EEJJEEC
CTT
?
?
button on the front of
the video recorder until the modulator
frequency of the set appears in the display
(e.g.:
M583
for 583 MHz)
4
Use
==
PP-- or
;;
PP++ to select the option
OPTIMIZE FREQUENCY
and enter a new
frequency with the number buttons 00--99
PPRRO
OBBLLEEM
M
W
Whhiicchh m
moodduullaattoorr ffrreeqquueennccyy sshhoouulldd II eenntteerr??
You can also make the video recorder search
automatically for an appropriate frequency. To do so,
simply hold down the button
P
P
. As soon as a free
frequency has been found,it will be shown in the display.
5
Tune the programme number of your TV set
allocated for video use to the new modulator
frequency until you see the test image
sharply and in colour
M 5 8 3
OPTIMIZE MODULATOR
OPTIMIZE FREQUENCY
Q
583
P
MODULATOR
ON
EXIT
P
MENU
STORE
P
OK
?
