SELECT: CHANGE:
END: MENU
CLOCK
LANGUAGE ENGLISH
If you want to re-do the auto programming, follow
the procedure below;
1 Press
VCR
.
2 Press
MENU
.
3 Press
PLAY
5 or
STOP
∞
to select “TUNER SET UP”
then press
OK/STATUS
.
4 Press
PLAY
5 or
STOP
∞
to select “AUTO TUNER SET
UP” then press
OK/STATUS
.
5 Press
PLAY
5 or
STOP
∞
to select the appropriate TV
system [(BG, DK, I)] of your residential area.
6 Press
OK/STATUS.
Auto programming starts.
When it ends, programmed channels, frequencies
and TV systems are shown on the display.
7 Press
MENU
to exit.
5
6
S
S
etting
U
U
p
4 Press
MENU
.
The message on the right will
appear.
❍
Select TV System
1 Press
OK/STATUS.
The TV
system selecting menu appears
on the TV.
2 Press
PLAY
5 or
STOP
∞
to select the appropriate TV
system of your residential area.
B/G: For West Europe, ASEAN countries,
Australia, New Zealand.
D/K: For China, Russia, East Europe.
I: For Hong Kong, South Africa,
United Kingdom.
❍
Start Auto Programming
Press
OK/STATUS
. Auto prog-
ramming starts and the message on
the right appears on the TV.
When the auto programming
is completed
The message on the right appears
on the TV, and the lowest channel
will be tuned in.
Press
CH
5 or ∞ to change
channels on the VCR.
You have now completed the initial
setting.
If you stop the initial setup procedure while it is
proceeding:
The VCR enters the initial setup mode again the next
time you turn on the VCR.
Initial setup will not start in the following cases:
• If there is a tape inserted.
• If any of the initial setup procedures is finished
manually.
You can always change the time and language
setting after you completed the initial set up.
1 Press
VCR
.
2 Press
MENU
.
3 Press
PLAY
5 or
STOP
∞
to select “INITIAL SET UP”
then press
OK/STATUS
.
CONNECT ANTENNA OR CABLE
TO VCR FOR AUTO CH. SET
READY: OK
END: MENU
AUTO CH. SET PROCEEDING
PLEASE WAIT
START
FINISH
AUTO CH.SET COMPLETED
4
Before operating the VCR, be familiar with the
menu operations first because most of the features
built into the VCR can be available only on the
menus.
1 Press
VCR
on the remote control.
• When using the buttons on front panel, skip this step.
2 Press
MENU
to display the main menu screen.
3 Press
PLAY
5 or
STOP
∞ to select a desired
feature on the menu, then press
OK
/
STATUS.
4 When you select a feature, go to the section in
this manual and follow the instructions described
there.
To go back to the previous menu screen, press
REW
2.
To change the setting of a menu item, press FF
3.
Press
MENU
to exit.
To Reset the Channels
To Reset the Time or Language
TIME - - : - -
DATE 01/01/01
SET: NEXT: OK
END: MENU
SYS COUNTRY
B/G W.EUR. ASEAN AUST.
NZ
D/K CHINA RUS. E.EUR.
I HK S.AF. UK
SELECT: CONFIRM: OK
END: MENU
4 Press
PLAY
5 or
STOP
∞
to select “SET CLOCK” or
“LANGUAGE”, depending
on which setting you want
to change.
5 To change clock/date:
Repeat step 2 (Setting the Clock/Date) of
“Initial Set Up” on page 5.
To change language:
Press
FF
3 repeatedly to choose your preferred
language English or
.
6 Press
MENU
to exit.
VCR SET UP
TUNER SET UP
INITIAL SET UP
SELECT: CONFIRM: OK
END: MENU
❍
3
CHANGING TUNER SET UP
AUTO TUNER SET UP
SELECT: CONFIRM: OK
END: MENU
To Delete or Edit Receivable Channels
1 Press
VCR.
2 Press
MENU.
3 Press
PLAY
5 or
STOP
∞ to select
“TUNER SET UP”, then press OK/STATUS.
4 Press
PLAY
5 or
STOP
∞ to select
“CHANGING TUNER SET UP”, then press OK/
STATUS. The programmed
channel information list
appears.
5 Press
PLAY
5 or
STOP
∞
until the desired channel
setting flashes.
5.1: TO DELETE UNWANTED CHANNELS:
Press CLEAR. Repeat this step until you delete
all unwanted channels.
This VCR is designed to send picture and sound
signal on UHF channel E36 to the TV, through the
RF coaxial cable.
If you want to change this video channel (E36) to
another channel (between E28 to E60), follow the
procedure below before turning on the VCR for the
first time.
1 Make sure the VCR is turned off and no
cassette is inserted.
2 Turn on the TV, and tune it to any channel (UHF
28 to 60) you want to use as the video channel
on the TV.
• Select a channel not used in your area.
3 Press
STOP/EJECT
7
/
0
on the front panel for
more than 5 seconds.
The following indication appears on the display.
4 Press
CH
5 / ∞ on the front panel to select an
appropriate TV system number for your area.
1: For B/G. (For West Europe, ASEAN coun
tries, New Zealand)
2: For D/K. (For China, Russia, East Europe)
3: For I. (For Hong Kong, South Africa, United
Kingdom)
5 Press
OK/STATUS
.
The channel number starts flashing on the
display.
6 Press
CH
5 / ∞ on the front panel to select the
channel you have tuned on the TV as the video
channel in step 2.
7 Press
OK/STATUS
to finish the video channel
setting.
To watch a picture from this VCR on the TV,
select the same channel you have selected as the
video channel (in step 2 above) on the TV.
Setting the Video Channel
Channel number starts flashing.
Test signal
(two vertical white bars)
If you use only external video input (AV) mode to
watch the picture from this VCR:
You can turn off the video channel output. To turn off
the video output channel, press CH
∞ until “– –”
appears on the channel number position.
TV system number starts flashing.
Menu Operations
1
2
For the first time you turn on this VCR, some basic
settings must be done first before going on to further
operations.
❍
Select the Language
1 Press
POWER
.
The language selection screen
appears.
2 Press
PLAY
5 or
STOP
∞
to select either "ENGLISH",
or "
" (Chinese).
3 Press
OK/STATUS
.
❍
Setting the Clock/Date
1 Press
PLAY
5 or
STOP
∞ to
set the time. Each time you
press the button, the set time
changes by one-minute inter-
vals.
Press and hold the button to change time by 30-
minute intervals.
When the time is correct, press
OK/STATUS
.
2 Press
PLAY
5 or
STOP
∞ to set the date. Each
time you press the button, the date changes in
one-day increments. Press and hold the button to
change dates in 15-day increments. When the date
is correct, press
OK/STATUS
.
3 Press
PLAY
5 or
STOP
∞ to set the year. Each
time you press the button, the year changes by
one-year intervals. Press and hold the button to
change years rapidly. When the year is correct,
press
OK/STATUS
.
ENGLISH
SELECT: CONFIRM: OK
END: MENU
Initial Set Up
VCR SET UP
TUNER SET UP
INITIAL SET UP
SELECT: CONFIRM: OK
END: MENU
CH FRQ SYS CH FRQ SYS
01 150 BG 07 229 BG
02 165 BG 08 237 BG
03 195 BG 09 355 BG
04 205 BG 10 365 BG
05 213 BG 11 374 BG
06 221 BG 12 384 BG
SELECT: DELETE: CLEAR
CHANGE CH: OK
END: MENU
