2-4-18
HE490DA
(1): Follow steps in sequence. When reassembling, follow the steps in reverse order.
These numbers are also used as identification (location) No. of parts in the figures.
(2): Indicates the part to start disassembling with in order to disassemble the part in column (1).
(3): Name of the part
(4): Location of the part: T=Top B=Bottom R=Right L=Left
(5): Figure Number
(6): Identification of parts to be removed, unhooked, unlocked, released, unplugged, unclamped, or desoldered.
P=Spring, W=Washer, C=Cut Washer, S=Screw, *=Unhook, Unlock, Release, Unplug, or Desolder
e.g., 2(L-2) = two Locking Tabs (L-2).
(7): Adjustment Information for Installation
(+):Refer to Deck Exploded Views for lubrication.
.
[36]
[16],[26]
M Brake (TU) Assembly
(HI)
T
DM1,DM15
[37]
[2],[26]
M Brake (SP) Assembly
(HI)
T
DM1,DM15 *(P-6)
[38]
[37]
Tension Lever Assembly
T
DM1,DM15
[39]
[38]
T Lever Holder
T
DM15
*(L-10)
[40]
[40]
M Gear (HI)
T
DM1,DM15 (C-6)
[41]
[15],[40] Sensor Gear (HI)
T
DM1,DM15 (C-7)
[42]
[36],[40] Reel T
T
DM1,DM15
[43]
[38]
Reel S
T
DM1,DM15
[44]
[34],[38]
Moving Guide S
Preparation
T
DM1,DM16
[45]
[35]
Moving Guide T
Preparation
T
DM1,DM16
[46]
[19]
TG Post Assembly
T
DM1,DM16 *(L-11)
[47]
[27]
Rack Assembly
R
DM17
(+)Refer to Alignment
Sec.Pg.2-4-24
[48]
[47]
F Door Opener
R
DM17
[49]
[49]
Cleaner Assembly
T
DM1,DM6
[50]
[49]
CL Post
T
DM6
*(L-12)
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
↓
(6)
↓
(7)
STEP
/LOC.
No.
START-
ING
No.
PART
REMOVAL
INSTALLATION
Fig. No.
REMOVE/*UNHOOK/
UNLOCK/RELEASE/
UNPLUG/DESOLDER
ADJUSTMENT
CONDITION
