Philips VR 670B/07, User Manual, Page: 36 / 51

32
Problemsand solutionsfor programmed
recordings
PROBLEM SOLUTION
The video recorder
will not operate
b
While a programmed recording is being made, you cannot operate your video recorder manually.
If you want to cancel the programmed recording, press
STANDBY/ON
m
.
'
SWITCH TO
STANDBY- TIMER
RECORDING
' flashes on
the TV screen
b
The video recorder was switched on several minutes before the start of a programmed recording.
Switch off the video recorder with
STANDBY/ON
m
. A programmed recording (timer) will
only function if the video recorder is switched off.
Cassette is ejected
during recording
b
The end of the tape was reached during recording.
Error message: '
NO
CASSETTE
'
k
' will flash
in the video recorder
display
b
No cassette was inserted. Insert a cassette and switch off the video recorder using
STANDBY/ON
m
.
Cassette was ejected
assoon asthe
OK
button was pressed
b
A cassette was inserted with the security tab removed. Undo the erase protection (chapter
'Manual Recording', section 'Preventing accidental erasing of cassettes') or insert a different
cassette.
Error message: '
ALL
TIMERS OCCUPIED
'
b
If this error message appears after pressing TIMER
k
, then all TIMER blocks are already
programmed. No more recordings can be programmed. If you want to clear a programmed
recording (TIMER block), select it with
P
;q
or P
=r
and then press CLEAR (CL) .
Programming a recording (without
VIDEO Plus+)
1
Switch on the TV set. If required, select the programme number for
the video recorder.
2
Press TIMER
k
on the remote control twice . A free TIMER block
will be highlighted.
3
Press TIMER
k
. The information will appear on the screen.
TIMER
VPS
DATE REP. PROG. START PDC END
21 MO-FR 01 20:00 ] 21:30
________________________________
REP.pSELECT
STOREpOK
4
With TIMER
k
,
SqP
or
QSr
you can select '
DATE
'
(date), '
PROG.
' (programme number), '
START
' (start time) and '
END
'
(end time).
Enter or change your information with
P
;q
or P
=r
, or with the
number buttons 0-9 on the remote control.
Programming a recording (TIMER)