Philips VoiceTracer VTR6160, User Manual

Page: 27 / 40

EN 27
Eng
lish
2 Set the device to voice-to-text mode before using the
PC software. When the unit is on, if sound effects are
on, press the sound effect key for 3s to switch off sound
effects and enter the voice-to-text mode. At this point,
the green LED will be on.
3 If it is connected to a laptop, please refer to the first point
of “Live Voice to Text” for connection to a desktop
computer. If it is connected to a desktop, please refer to
the second point for instructions.
4 Line-in cable (four-section head) is as shown below:
5 Main interface: Record, Voice-to-text, Real-time
transcription
,
File directory, Language setting, Send
message.
The recording interface includes: Start recording, Pause
recording, Save recording.
After logging in, in the main interface, you can select the “Start
recording” module to enter the recording. The recording in-
terface is as shown below. Select “Done” to save the current
recording file. You can make the recordings directly on the
micro TF card and move them to the PC for transcription.
But you cannot playback the recordings directly from the
mirco TF card.