Philips VoiceTracer VTR6080, User Manual

Page: 42 / 62

42 EN EN 43
Note
• Name of WIFI should not include Chinese, Japanese or
Korean characters. Otherwise, the name will contain
unreadable characters.
• The password can only be 12 digits.
Smart phone hotspot connection
(1)Manual setting
WIFI Name:VTR6080
Password:12345678
(2)Long press “
” or “ ” to select Manual hotspot
network and press “YOU” to confirm. Then the WIFI icon
on the device will blink. When WIFI icon stops blinking, or
if the WIFI icon turns “ ” into it means the device has
been connected with the cellphone as shown below:
If WIFI icon keeps blinking more than 30 seconds, which
means the attempted connection is not successful, please
check whether your password is correct.
Cancel connected network
The device can erase all passwords of the WIFI networks
connected before. Press “
” or “ ” button to choose
the network to be cancelled and press “YOU” to confirm
the cancellation. The cancellation will take effect during next
network connection attempt.
Shut down network
There are two methods for shutting down the network:
Method One: When WIFI is turned on, select “Setting Mode”
by pressing “
” or “ ” button and then press “YOU” to
enter the system setting page. In system setting press “ ”
or “ ” button to select WLAN and then press “ ” or “
” button on WLAN page to select “Forget all WIFI” option
and then press “YOU” button to confirm shutdown, by then
the “
” icon will also disappear.
Method Two: When WIFI is turned on, select “Setting Mode”
by pressing “
” or “ ” button and then press “YOU” to
enter the system setting page. In system setting press “ ”
or “ ” button to select WLAN and then press “ ” or “
” button on WLAN page to select “Turn off WIFI” option
and then press “YOU” button to confirm shutdown, by then
the “
” icon will also disappear.