56
V40 107P5
17" V40 107P5 97KHz CMTR(HB)
TYPE
: 107P50/00
BRAND : PHILIPS
8639 000 13853
2003-10-13
590
12
24
Michael Wang
2003-10-13
GENERAL PRODUCT SPECIFICATION
4.1
Display resolutions
See 3.1.3
4.2
Image size (Factory pre-set modes only)
The dimensions of guaranteed display area to be measured
along the picture center of horizontal and vertical axis
of the screen as listed below: (preset modes only, refer
to Fig- 1/ Fig- 2)
Width
: 310 +/- 4 mm .(Fig- 1)
Height
: 230 +/- 4 mm .(Fig- 1)
4.3
Image centering deviation (Factory preset modes only)
With respect to Fig- 2, the target relationships are
the following:
|A - B| <= 4 mm
|C - D| <= 4 mm
Note: The centering is adjustable by the end-user.
4.4
Picture shift control range
H-shift range
: 10 mm min. (+/- 3mm,from center to each side)
V-shift range
: 10 mm min. (+/- 2mm,from center to each side)
4.5
Picture tilt
With respect to Fig- 3, Tilt to be measured on extremes
of center line from bezel.
Tilt
: < = 2 mm
4.6
Geometric distortions
It is acceptable that pincushion, trapezoid, rhomboid,
rotation and various waves distortions must remain within
the limits of tolerance as in Fig- 4,
½
A
½
,
½
B
½
2.0mm
½
C
½
,
½
D
½
2.0mm
ô
A + B
ô
3.5mm
ô
C + D
ô
3.5mm
The waviness of any vertical or horizontal shall be less than 1.0 mm
over a 50 mm distance.
http://jdwxzlw.5d6d.com/?fromuser=华盛维修
家电维修资料网，免费下载各种维修资料
