Mechanical Instructions
EN 6
LCD CMO 2K7
4.
4.2
Models V315B1-L05 and V320B1-L05
4.2.1
Control Board
Disassembly
1. Place the panel on the foam bars, and remove the screws
of the metal cover (the number of screws depends on the
model).
Figure 4-3 Cover screws
2. Remove the cover in the direction as shown. Be sure not to
damage the FFCs.
Figure 4-4 Remove cover
3. Release the four FFCs from their connectors, use tweezers
if possible.
Figure 4-5 Release FFCs
4. You can now remove the Control Board.
Reassembly
1. Place the panel on the foam bars, and place the Control
Board on the panel via the alignment pins.
Figure 4-6 Alignment pins
2. Insert and lock the FFCs into their connectors.
Figure 4-7 FFC insertion
3. Place the metal cover in the direction shown.
Figure 4-8 Cover placement
4. Secure the cover screws (refer to earlier figure “Cover
screws”).
H_16920_016.eps
110407
H_16920_017.eps
110407
H_16920_018.eps
110407
H_16920_020.eps
110407
H_16920_021.eps
110407
H_16920_022.eps
110407
