shaving
Before you use the shaving unit, always check it for damage or wear. If
the shaving unit is damaged or worn, do not use it, as injury may occur.
Replace a damaged shaving unit before you use it again (see chapter
‘Replacement’).
1
Hold the appliance in the shaving position, with the shaving unit
pointing upwards and the trimming unit pointing
downwards (Fig. 12).
2
Press the shaving unit on/off button once to switch on the shaving
unit (Fig. 13).
3
Place the shaving unit on the skin (Fig. 14).
4
Move the appliance against the direction of hair growth while you
press it lightly (Fig. 15).
Tips
Stretch your skin with your free hand to make the hairs stand upright.
Make sure that the shaving unit is always fully in contact with the skin.
If the hairs are longer than 10mm, trim them first to make shaving
easier.
5
To switch off the shaving unit after use, press the shaving unit on/off
button again (Fig. 13).
Cleaning and maintenance
Clean the appliance after every use.
Never use compressed air, scouring pads, abrasive cleaning agents or
aggressive liquids such as petrol or acetone to clean the appliance.
Note: The trimming unit and shaving unit do not need any lubrication.
1
Switch off the appliance.
2
Rinse the appliance under the tap.
-
-
-
English
DFU_bodyG_TT2039_CS2_A6.indd 21
12.4.11 2:42:27 PM
