Mechanical Instructions
4.
4.3.5
Power Supply Board
1.
Refer to next figure.
2.
Unplug all the connectors [1].
3.
Remove the fixation screws [2]
4.
Remove the board.
Figure 4-7 Power supply board
4.3.6
Scaler Board (SB)
Caution
: it is absolutely mandatory to remount all different
screws at their original position during re-assembly. Failure to
do so may result in damaging the SB.
Removing the SB
1.
See the figure ”SB removal”.
2.
Unplug all of the cables [1].
3.
Removed the parker screws [2].
Figure 4-8 SB removal
4.4
Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
•
While re-assembling, make sure that all cables are placed
and connected in their original position. See figure "Cable
dressing".
•
Pay special attention not to damage the EMC foams at the
SB shields. Make sure, that EMC foams are put correctly
on their places.
I_17610_009.ep
s
2
8
0
3
0
8
1
2
1
2
1
1
I_17610_011.ep
s
2
8
0
3
0
8
1
1
1
2
1
2
