Alignments
6.
6.5
Reset of Repaired SSB
A very important issue towards a repaired SSB from a Service
repair shop (SSB repair on component level) implies the reset
of the NVM on the SSB.
A repaired SSB in Service should get the service Set type
“00PF0000000000” and Production code “00000000000000”.
Also the virgin bit is to be set. To set all this, you can use the
ComPair tool or use the “NVM editor” and “Dealer options”
items in SAM (do not forget to “store”).
After a repaired SSB has been mounted in the set (set repair
on board level), the type number (CTN) and production code of
the TV has to be set according to the type plate of the set. For
this, you can use the NVM editor in SAM. The loading of the
CTN and production code can also be done via ComPair
(Model number programming).
In case of a display replacement, reset the “Operation hours
display” to “0”, or to the operation hours of the replacement
display.
Remark:
- After the NVM has been replaced, go to SAM and scroll to the
<Reload MAC address> (see figure 1*).
- Select the item and press <OK> on the RC.
6.5.1
Reset of Repaired SSB
Instruction
After NVM replacement,
reload MAC address via SAM
menu.This ensures the correct MAC address to be available in
CSM for future repair actions.
Way of working:
•
After the NVM has been replaced, go to SAM and scroll to
the <Reload MAC address> .
•
Select the item and press <OK> on the RC.
Notes:
•
Only applicable to all related models that are “Smart TV
level 0”enabled (only YouTube access). For models
without internet connection feature, no action is needed.
•
HDCP keys are located in the NVM. If you are loading NVM
with the ComPair tool, there is warning message displayed.
New NVM EEPROMs are shipped with pre-loaded HDCP keys.
6.5.2
SSB Identification
SSB’s of this chassis are identified by a “715” code on the SSB.
715Axxxx-Nnn-MMM-OOOO
•
715 main category, Printed Wiring Board
•
Axxxx sub category, sequential coding number
•
Nnn Version code
•
N Development number
•
nn Production number
•
MMM Mounting variation code
•
OOOO Optional variation code
Make sure when replacing an SSB the SSB identification codes
match the replacement panel.
6.6
Cable position numbers
In this chassis, the cable position numbers can be defined via
the rule that the number is always starting with an “E” followed
by the connector number of the current sourcing board. The
order is always seen from where the power initiates from. So
from PSU to SSB, from SSB to IR/LED panel, from IR/LED
panel to keyboard control panel. For example, a cable from the
PSU connector CN902 to the SSB connector CN701, will have
the position number ECN902.
47PFL5008M/08
LC470EUE-FFF1
191
47PFL5008T/12
LC470EUE-FFF1
191
47PFL5008T/60
LC470EUE-FFF1
191
47PFL5028H/12
LC470EUE-FFF1
191
47PFL5028K/12
LC470EUE-FFF1
191
47PFL5028M/08
LC470EUE-FFF1
191
47PFL5028T/12
LC470EUE-FFF1
191
47PFL5028T/60
LC470EUE-FFF1
191
47PFL5038H/12
LC470EUE-FFF1
191
47PFL5038K/12
LC470EUE-FFF1
191
47PFL5038T/12
LC470EUE-FFF1
191
47PFL5038T/60
LC470EUE-FFF1
191
50PFL4208H/12
TPT500J1-LE1
177
50PFL4208K/12
TPT500J1-LE1
177
50PFL4208M/08
TPT500J1-LE1
177
50PFL4208T/12
TPT500J1-LE1
177
50PFL5008H/12
LC500EUE-FFF1
192
50PFL5008K/12
LC500EUE-FFF1
192
50PFL5008M/08
LC500EUE-FFF1
192
50PFL5008T/12
LC500EUE-FFF1
192
50PFL5008T/60
LC500EUE-FFF1
192
50PFL5028H/12
LC500EUE-FFF1
192
50PFL5028K/12
LC500EUE-FFF1
192
50PFL5028M/08
LC500EUE-FFF1
192
50PFL5028T/12
LC500EUE-FFF1
192
50PFL5028T/60
LC500EUE-FFF1
192
50PFL5038H/12
LC500EUE-FFF1
192
50PFL5038K/12
LC500EUE-FFF1
192
50PFL5038T/12
LC500EUE-FFF1
192
50PFL5038T/60
LC500EUE-FFF1
192
55PFL4308H/12
LTA550HJ15
188
55PFL4308K/12
LTA550HJ15
188
55PFL4308T/12
LTA550HJ15
188
55PFL4308T/60
LTA550HJ15
188
55PFL4508H/12
LTA550HJ15
188
55PFL4508K/12
LTA550HJ15
188
55PFL4508M/08
LTA550HJ15
188
55PFL4508T/12
LTA550HJ15
188
55PFL4508T/60
LTA550HJ15
188
55PFL4528H/12
LTA550HJ15
188
55PFL4528T/12
LTA550HJ15
188
55PFL4528T/60
LTA550HJ15
188
CTN_ALT BOM#
Panel Type
Display Code
