Philips TD6600 User Manual Download

Page: 4 / 49

Your display

When:

ese symbols

you what is

ppening on

ur phone.

This line of
display sho
up to 10
numbers o
characters

is on

- your handset is in menu mode.

is on

- you are in an internal call with another handset.

- an outside call has been put on hold.

blinks

- another handset is calling your handset.

is on

- the outside line is occupied.

- the outside line is on hold.

blinks

- the outside line is ringing.

is on

- the handset is charging when

the base station.

- the battery is discharged when

off

the base station.

is on

- your handset is out of range of the base station.

- you are reaching the limit of the handset’s range.

- your handset is not subscribed to any base station.

is on

- the handset loudspeaker is on.

is on

- your answering machine is switched on.

- your answering machine is answering a call.

- you have pressed the

key to operate your answering machine.

blinks

- you have received new messages on the answering machine.

Summary of Contents for TD6600


















































Search results

Summary of Contents for TD6600

Reviews:

Related manuals for TD6600

Brands by name

Popular brands

Philips TD6600, User Manual

Search results

Summary of Contents for TD6600

Reviews:

Related manuals for TD6600

Brands by name

Popular brands