7
English
EN
3 Installation
Connect the HDMI switcher
to your HD devices and
video sources
You can connect four video sources to the
HDMI switcher at the same time, but you can
only select one source each time.
1
Connect the HDMI cables of the video
sources to the input jacks (
1/2/3/4
) of the
HDMI switcher.
2
Connect the HDMI cable of your HDTV
to the output jack of the HDMI switcher.
3
Connect one end of the power adapter
to the DC input jack of the HDMI
switcher and the other end to a power
socket. When there is a good power
supply, the indicators are always on.
The power LED indicator lights up in
»
red.
The input 1 indicator lights up in green.
»
The CEC indicator lights up in blue.
»
Tip
You can also refer to the plug-and-play
•
diagram at the back of the package.
4 Activate the
SWS3435S
function
1
Turn on the HDTV, video sources and
HDMI switcher.
2
Press
POWER/SELECT
to select the
video sources one by one. Ensure all
video sources work properly.
Note
Repeat the above procedure if the power
•
supply is interrupted.
For CEC compliant HDTV
and video sources
Ensure your HDTV and video sources are
•
in standby mode.
Ensure the CEC function of your HDTV
•
and video sources are activated.
Tip
For more information, see the user manuals of
•
your HDTV and video sources.
•
One touch play function
:
Switch on your video source.
The HDMI switcher is on and
»
switches to the correct input source.
The HDTV is on and switches to the
»
corresponding input source.
•
Automatic switching
:
Switch on a video source.
The HDMI switcher switches to
»
the corresponding input source
automatically.
Depending on different video sources,
»
the previous selected source device
changes to / /standby mode.
