Philips SW3660/00, Service Manual

Page: 5 / 14

DISASSEMBLY INSTRUCTIONS
2-1
Dismantling the Speaker Grille & Speaker Driver
1. Place the Subwoofer Box as shown in the Picture 1 and
use a screw driver to force open the Speaker Grille.
Caution: Take care the surface when take out the
Speaker Grille of Subwoofer
2. Place the Subwoofer Box as shown in the Picture 2
and loosen 4 screws A to remove the Speaker Driver.
Dismantling the Front Assembly
1. Place the Subwoofer Box as shown in the Picture 3
and use a screw driver to force open the front assembly.
Dismantling the Rear assembly
1. Loosen 10 screws B as shown in the Picture 4 (Rear
View) to pull out the Printed Circuit Board assembly.
Caution: Do not break the bundle of wires to the front.
Take care the surface when take out the front
panel of subwoofer
Caution: Do not break the bundle of wires to the front.
Picture 4
Picture 3
WARNING: THERE IS ONLY A LED BETWEEN
THE FRONT PANEL AND WOOD BOX. IF NOT
NECCESSARY, PLEASE DON’T TRY TO OPEN
THE FRONT PANEL!!!
A
Picture 2 Picture 1
B